-
FCC**-7N -
Color Ring -
Slim Profile SMPTE HFO Camera Cables
OD7mm Slim Profile, PVC Jacket, Camera to CCU.
- Note:
- Canare OC series (Hybrid-OPS profile / Japanese style) is also available. Please contact us for more details.
- TECH DATA
- TECH NOTE
- DOWNLOAD
Slim Profile SMPTE HFO Camera Cables
| Type | Model | Length (m) | Weight (kg) | O.D (mm) |
|---|---|---|---|---|
 BLK
|
FCC10-7N | 10 | 1.1 | φ7.1 |
| FCC20-7N | 20 | 1.8 | ||
| FCC25-7N | 25 | 2.3 | ||
| FCC30-7N | 30 | 2.6 | ||
| FCC50-7N | 50 | 4.0 | ||
| FCC100-7N | 100 | 7.7 |
Key Features and Benefits
- Equipped with slim and lightweight cable.
- FCC100-7N is approx. 5 kg lighter than typical 100m HFO camera cable as FCC100N.
- Heat shrink tubes help in labeling.
- 7-color connector rings included.
- Note:
- The power transmission distance of FCC**-7N is approx. half of that of the FCC**N.
About Camera Cable Assemblies
Canare OC hybrid camera connectors (Japanese style) are commonly used in Japan and Asian countries. It includes the same combination of SMPTE but different pinouts. Canare OC series are non-compatible with SMPTE connectors (Canare FC series). Please use SMPTE conversion cables according to your application.
| SMPTE ST 304/311 (FC Connector) | Japanese Style (OC Connector) | |
|---|---|---|
| About | Symmetric pinout Finger detachable insulator Better grip, proper connections SMPTE ST 311 cable ready Camera MFGs accepted Hybrid-OPS profile | SMPTE and ARIB standardt Detachable insulator with tool Widely used in the market Hybrid-3K profile |
| Female connecter to Men connecter |  |
 |
| Men connecter to Female connecter |  |
 |
Technical Note
Hybrid Fiber-Optic Camera Cable Checker
The connector sections to be cleaned are the key parts, including the tips and sides of ferrules, the interior walls of alignment sleeves and the interior and exterior of connector shells. Note that scratches and particles of foreign matter on the tip of the ferrule can have a disabling effect on fiber-optic transmission. The following procedures should be used when cleaning hybrid fiber-optic camera connectors.
- For Plugs, the interior surfaces of alignment sleeves and the tips of ferrules are to be cleaned with the non-alcohol treated cleaning stick using a gentle stroking action.
Canare FCFA and FCFRA enhance easy cleaning procedure for its innovative alignment sleeve and insulator detachable design.
US Patent: No.7241055B2 - For Jacks, it is important to clean both the tips and sides of the completely protruding ferrules with the cleaning stick.
- Both the male and female connector shells tend to attract dust and metal particles, so it is important to clean both the insides and outsides using cotton gauze or similar material.
Cleaning Stick /Model: CLETOP 2.5/2.0
- Compact and disposable
- Allows cleaning both the tips and sides of ferrules
- Manufactured by NTT-AT
IBC Brand Cleaner M-20 /Model: 14347 CLEANER
- Easy “one-push” cleaner
- Allows cleaning the tips of ferrules without removing alignment sleeve
- Manufactured by US Conec
Cleaning guide for female connectors
| SMPTE ST 304/311 (FC Series) | Japanese Style (OC Series) & OM6 Series | |
|---|---|---|
| FCFA / FCF7A / FCFRA / FCFRCA | OCFA / OCF7A / OCFRA / OCFRCB / OM6PA / OM6PRA | |
|
1 Extract an insulator unit. |
 |
 |
|
2 Clean up ferrules. |
 |
 |
|
3 Dust away on alignment sleeves |
 |
 |
|
4 Put back the unit in place |
 |
 |
| OM12 Series | ||
|---|---|---|
| OM12JR / OM12J | OM12PR / OM12P | |
|
1 Put back the unit in place |
 |
 |
Drawing
Specification
Product Finder [ SMPTE ST 304/311 Camera Cables ]
| FCC**N | FCC**A-WJ | FCC**-9T | FCC**-7N | FCC**-7T | ||
|---|---|---|---|---|---|---|
| Connecters |   FCFA / FCMA |
FCF7A / FCM7A |
||||
| Cables [Model] | LF-2SM9N | LF-2SM16 | LF-2SM9T | LF-2SM7N | LF-2SM7T | |
| Features | Basic | Super Tough | Tough & Flexibility | Slim & Light | Slim & Lightweight & Tough & Flexible | |
| Cross Section |  |
 |
 |
 |
 |
|
| Outer Jacket | Abrasion-resistance PVC | Double PVC | TPU + PVC | Abrasion-resistance PVC | TPU + PVC | |
| Sales units (m) | Call | |||||
| Nom.O.D. (mm) |  |
 |
|
 |
|
|
| Weight kg/100m (*1) | 12.0 | 29.0 | 9.8 | 7.3 | 5.5 | |
| Overrall shield | 9/24/0.10TA 91% | N/A | N/A | 7.3 | 8/24/0.10TA 91% | |
| Tension Tolerance (N) | 700 | 700 | 1500 | 300 | 1000 | |
| Strength Member O.D.(mm) | 2.6 | 2.6 | 1.8 mm + Tensile strength fiber | 1.4 | 0.63 mm + Tensile strength fiber | |
| Min Bend Radius | 6 x Nom. O.D | 6 x Nom. O.D | Equal to Nom. O.D. | 6 x Nom. O.D | Equal to Nom. O.D | |
| Temp. Range (deg C) | -40 to +75 | |||||
| Channel Unit | Fiber | 2 x SM 9/125 (low-water-peak) Unit O.D. 0.9 mm |
2 x SM 9/125 (low-water-peak) Unit O.D. 0.9 mm |
2 x SM 9/125 (low-water-peak) Unit O.D. 0.9 mm |
2 x SM 9/125 (low-water-peak) Unit O.D. 0.9 mm |
2 x SM 9/125 (low-water-peak) Unit O.D. 1.7 mm |
| Aux. (Power) | 4 x 20 AWG 21 / 0.18TA Unit O.D. 1.7 mm |
4 x 20 AWG 21 / 0.18TA Unit O.D. 1.7 mm |
4 x 20 AWG 102 / 0.08A Unit O.D 1.75 mm |
2 x 20 AWG 21 / 0.18TA Unit O.D. 1.7 mm |
2 x 23 AWG 60 / 0.08A Unit O.D. 1.4 mm |
|
| Signal (control) | 2 x 25 AWG 7 / 0.18TA Unit O.D. 1.2mm |
2 x 25 AWG 7 / 0.18TA Unit O.D. 1.2mm |
2 x 25 AWG 24 / 0.08A Unit O.D 1.2mm |
2 x 25 AWG 7 / 0.18A Unit O.D. 1.2 mm |
2 x 26 AWG 30 / 0.08A Unit O.D. 1.1mm |
|
(*1) Without connectors
