-
BCJ-BPLHK -
BCJ-BPLHK2P -
BCJ-BPLHA -
BCJ-BPLH2PA -
BCJ-BPLH3PA -
BCJ-BPCK -
BCJ-BPC2P
75 ohm BNC PCB Mount Receptacles (Screw Type)
True 75 ohm PC board mount receptacle. Right Angle types can be fixed on PC board with M2.6 screw.
Key Features and Benefits
- True 75 ohm PC board mount receptacle.
- Gold plated beryllium copper center contact.
- Right Angle types can be fixed on PC board with M2.6 screw.
- Space-saving design
- Eliminates wiring material and cost.
- Compact 16mm pitch design ideal for high density mounting
- Right Angle types can be fixed on PC board with screws, which improves solderability.
- Compact pitch design ideal for high density mounting.
Right Angle types:16mm pitch
Straight types:16.5mm pitch
- Note:
- Any cleaning solvents cannot be used. This leads to insulation problems. Insulation material: m-PPO (m-PPE).
- Tech Data
- Downloads
Front Mount12G-SDI
| Type | Model | Description | Stud Position | Panel Mount | Standard Package |
|---|---|---|---|---|---|
 |
BCJ-BPLHK | Right Angle, for 12G-SDI | Horizontal | Front: M2.6 screw | 20 pcs / 100 pcs |
 |
BCJ-BPLHK2P | Right Angle, for 12G-SDI | Horizontal | 10 pcs | |
 |
BCJ-BPCK | Straight, for 12G-SDI | - | 20 pcs |
- Screws not included
Key Features and Benefits
- 16 mm: Minimum pitch between adjacent connectors
- Right Angle types can be fixed on PC board with screws, which improves soldering process.
- <Rerurn Loss> BCJ-BPLHK : 26 dB @ 1.5 GHz, 20 dB @ 3 GHz, 15 dB @ 6 GHz, 10 dB @ 12 GHz
- <Rerurn Loss> BCJ-BPLHK2P : 26 dB @ 1.5 GHz, 20 dB @ 3 GHz, 15 dB @ 6 GHz, 10 dB @ 12 GHz
- <Rerurn Loss> BCJ-BPCK : 26 dB @ 1.5 GHz, 20 dB @ 3 GHz, 15 dB @ 6 GHz, 10 dB @ 12 GHz
< Rerurn Loss >
-
BCJ-BPLHK
-
BCJ-BPLHK2P
-
BCJ-BPCK
| BCJ-BPLHK | BCJ-BPLHK2P | BCJ-BPCK | |
|---|---|---|---|
| Panel Hole Dim. |  Screw:M2.6 t1.6 |
 Screw:M2.6 t1.6 |
 Screw:M2.6 t1.6 |
| PCB Hole Dim. | 
t2.0 |
t2.0 |
t1.6 |
Front Mount
| Type | Model | Description | Stud Position | Panel Mount | Standard Package |
|---|---|---|---|---|---|
 |
BCJ-BPLHA | Right Angle | Horizontal | Front: M2.6 screw | 20 pcs / 100 pcs |
 |
BCJ-BPLH2PA | Right Angle, Dual Jack | 10 pcs | ||
 |
BCJ-BPLH3PA | Right Angle, Triple Jack | 10 pcs | ||
 |
BCJ-BPC2P | Straight, Dual Jack | - | 10 pcs / 100 pcs |
- Screws not included
Key Features and Benefits
- 16 mm: Minimum pitch between adjacent connectors
- Compact pitch design ideal for high density mounting.
Right Angle types:16mm pitch
Straight types:16.5mm pitch - <Rerurn Loss> BCJ-BPLHA : 26 dB @ 1.5 GHz, 20 dB @ 3 GHz
- <Rerurn Loss> BCJ-BPC2P : 26 dB @ 1 GHz, 20 dB @ 2.5 GHz
< Rerurn Loss >
-
BCJ-BPLHA
-
BCJ-BPLH2PA
-
BCJ-BPC2P
| BCJ-BPLHA | BCJ-BPLH2PA | BCJ-BPLH3PA | BCJ-BPC2P | |
|---|---|---|---|---|
| Panel Hole Dim. | Screw:M2.6 t1.6 |
Screw:M2.6 t1.6 |
 Screw:M2.6 t1.6 |
 Screw:M2.6 t1.6 |
| PCB Hole Dim. | 
t2.0 |
t2.0 |
t1.6 |
t1.6 |
Technical Note
Voltage Standing - wave Ratio (VSWR) and Return Loss
Terminating the receiving end of a limited length coaxial cable using a resistance value not equal to its characteristic impedance creates a reflected wave that returns back down the cable to the sending end. The result is interference developing between the travelling wave and the return wave which results in a standing wave that causes voltage levels to fluctuate. The degree to which terminating resistance matches the characteristic impedance is indicated using the VSWR or voltage standing-wave ratio standard shown in Fig. 1. Going hand in hand with the VSWR ratio is the return loss factor which measures the size of the reflected wave current in relation to the travelling wave current. (See Fig. 2)
Fig. 1 Voltage Distribution Over Coaxial Cable
| VSWR | Return Loss (dB) |
|---|---|
| 2 | 9.54 |
| 1.5 | 13.98 |
| 1.2 | 20.83 |
| 1.1 | 26.44 |
| 1.05 | 32.26 |
| 1.02 | 40.09 |
| 1.01 | 46.06 |
Fig. 2 VSWR to Return Loss Conversion Table