-
BCP-D55UHD -
BCP-D55UHW -
BCP-A3F -
BCP-B5F -
BCP-C7A
75 ohm BNC Crimp Plugs
Canare added the new BCP-D series for 12G-SDI. SMPTE ST 2082-1 fully compliant connector makes UHD solutions as simple as existing SDI systems. The world’s highest quality BNC includes BCP-B for 3G-SDI, BCP-A/C for up to HD.
Key Features and Benefits
- Our unique elongated body design enables easy attachment and removal.
- Gold plating on the contact pin prevents deterioration, even after years of use.
- Lock mechanism used on insulation improves reliability by preventing shifting or detaching of the center pin.
- Note1:
- Be sure to use Canare Crimp Tool.
- Note2:
- For crimping instructions, please refer to this page or the instruction manual.
- Tech Data
- Tech Note
- Downloads
BCP-D Series12G-SDICrimp Type
| Model | Suitable Cable | Center Pin | Sleeve | Boot | Die Set | Standard package | |
|---|---|---|---|---|---|---|---|
| Canare | Others | ||||||
| BCP-D33UHD | L-3.3CUHD | - | BN1181 | BN7003A | CB03 | TCD-35CA | 20pcs / 100pcs |
| BCP-D55UHD | L-5.5CUHD | - | BN1175 | B75004A | - | TCD-55UHD | 20pcs / 100pcs |
| BCP-D55UHWNEW | L-5.5CUHWS | - | BN1192 | BN7014 | CB055W | TCD-57C | 20pcs / 100pcs |
| BCP-D57 | - | 4794R | BN1192 | BN7002 | - | TCD-57C | 20pcs / 100pcs |
| BCP-D8UHD | L-8CUHD, L-8CHD | - | BN1174 | BN7147 | - | TCD-8HD* | 20pcs / 100pcs |
Key Features and Benefits
- Our highest performance BNC plug newly developed for 12G-SDI
- Sufficient margin against SMPTE standard.
- Return Loss: 20 dB @ 6 GHz, 15 dB @ 12 GHz
- The BCP-D series takes over features from Canare's BNC connectors, such as the elongated body design and the snap locks center pin.
- Canare crimp design ensures quick and reliable installation.
< Return loss >
BCP-D55UHD
- note1:
- Be sure to use Canare Crimp Tool.
- note2:
- For crimping instructions, please refer to this page or the instruction manual.
- (*):
- Crimp tool for TCD-8HD is TC-2
BCP-B SeriesCrimp Type
| Model | Suitable Cable | Center Pin | Sleeve | Boot | Die Set | Standard package | |
|---|---|---|---|---|---|---|---|
| Canare | Others | ||||||
| BCP-B25HD | L-2.5CHD, L-2.5CHLT | VDM230 | B11015E | BN7129 | CB02 | TCD-35CA | 20pcs / 100pcs |
| BCP-B25HW | L-2.5CHWS, V4-2.5CHW | - | B11015E | BN7143 | CB02 | TCD-35CA | 20pcs / 100pcs |
| BCP-B26 | - | 1855A, 1855P | B11014E | BN7029C | CB02 | TCD-35CA | 20pcs / 100pcs |
| BCP-B28 | - | 1855ENH,HD PRO 0.6/2.8 AF | B11015E | BN7052A | CB02 | TCD-35CA | 20pcs / 100pcs |
| BCP-B3F | L-3CFB, V*-3CFB | - | B11015E | BN7003A | CB03 | TCD-35CA | 20pcs / 100pcs |
| BCP-B31F | L-3CFW, V*-3CFW | - | B11015E | BN7015A | CB04 | TCD-4CA, TCD-451CA | 20pcs / 100pcs |
| BCP-B4F | L-4CHD, L-4CFB, V*-4CFB | 1505A, 1505ANH, VPM2000, HD PRO 0.8/3.7 AF | B11016E | BN7015A | CB04 | TCD-4CA, TCD-451CA | 20pcs / 100pcs |
| BCP-B45HW | L-4.5CHWS | 1694F | B11020D | BN7016 | CB05A | TCD-35CA | 20pcs / 100pcs |
| BCP-B53 | L-4.5CHD | 1694A | B11020D | BN7046 | CB05A | TCD-35CA | 20pcs / 100pcs |
| BCP-B56 | - | HD PRO 1.0/4.8 AF | B11020D | BN7046 | CB05A | TCD-35CA | 20pcs / 100pcs |
| BCP-B5F | L-5CFB, V*-5CFB | - | B11020D | B75004A | CB05A | TCD-5CF, TCD-55FA | 20pcs / 100pcs |
| BCP-B51F | L-5CFW, V*-5CFW | - | B11020D | B75004A | CB05A | TCD-5CF, TCD-55FA | 20pcs / 100pcs |
Key Features and Benefits
- Return Loss:@26.4dB@3GHz
< Return loss >
BCP-B5F
- Note1:
- Be sure to use Canare Crimp Tool.
- Note2:
- For crimping instructions, please refer to this page or the instruction manual.
- Note3:
- Position mark on the body makes it easier to check if the connector is locked.
- Note4:
- BCP-B series are specially designed for particular coax cables, and minimize return loss at until 3GHz.
BCP-A SeriesCrimp Type
| Model | Suitable Cable | Center Pin | Sleeve | Boot | Die Set | Standard package | |
|---|---|---|---|---|---|---|---|
| Canare | Others | ||||||
| BCP-A25 | L-2.5C2V | - | BN1018A | BN7029C | CB02 | TCD-35CA | 20pcs / 100pcs |
| BCP-A25F | L-2.5CFB | 1855A, 8218, 1417B, 1418B | B11014E | BN7029C | CB02 | TCD-35CA | 20pcs / 100pcs |
| BCP-A3 | L-3C2VS, L-3C2V, V*-3C | - | B11014E | BN7003A | CB03 | TCD-35CA | 20pcs / 100pcs |
| BCP-A31 | L-3C2W | - | B11014E | BN7011 | CB04 | TCD-31C | 20pcs / 100pcs |
| BCP-A32 | - | 1506A, 1824A, 1825A, 1826A, 643948 | B11016E | BN7026A | CB03 | TCD-35CA | 20pcs / 100pcs |
| BCP-A3AHD | L-3C-AHD | - | B11016E | BN7003A | CB03 | TCD-35CA | 20pcs / 100pcs |
| BCP-A3F | L-3CFB, V*-3CFB | - | B11015E | BN7003A | CB03 | TCD-35CA | 20pcs / 100pcs |
| BCP-A4 | LV-61S | 8241, 8279, RG-59B/U | B11015E | BN7015A | CB04 | TCD-4CA, TCD-451CA | 20pcs / 100pcs |
| BCP-A42 | - | 1505F | B11016E | BN7011 | CB04 | TCD-31C | 20pcs / 100pcs |
| BCP-A4F | L-4CHD, L-4CFB, V*-4CFB | 1505A, 1505ANH, 8212, 8241F, 9167, 9259, 9659, VPM2000, HD PRO 0.8/3.7 AF | B11016E | BN7015A | CB04 | TCD-4CA, TCD-451CA | 20pcs / 100pcs |
| BCP-A5 | L-5C2VS, L-5C2V, V*-5C | - | B11016E | BN7016 | CB05A | TCD-35CA | 20pcs / 100pcs |
| BCP-A52 | L-5C2W | - | B11016E | BN7014 | - | TCD-451CA | 20pcs / 100pcs |
| BCP-A55 | - | 1695A, VSD2001TS | B11020D | BN7045A | CB04 | TCD-35CA | 20pcs / 100pcs |
| BCP-A5F | L-5CFB, V*-5CFB | - | B11020D | B75004A | CB05A | TCD-35CA | 20pcs / 100pcs |
| BCP-A77 | LV-77S | 8281F | B11016E | B75004A | CB05A | TCD-5CF, TCD-55FA | 20pcs / 100pcs |
| BCP-VA3 | V*-3C | - | B11014E | BN7052A | CB03 | TCD-35CA | 20pcs / 100pcs |
| BCP-VA5 | V*-5C | - | B11016E | BN7045A | CB05A | TCD-35CA | 20pcs / 100pcs |
Key Features and Benefits
- Return Loss:@26.4dB@2GHz、20.8dB@3GHz(*1)
- Canare crimp design ensures quick and reliable installation
- Gold plated “snap locks” center pin and beryllium copper outer contact.
- Elongated body design for stable finger grip.
- Position mark on the body makes it easier to check if the connector is locked.
< Return loss >
BCP-A3
- Note1:
- Be sure to use Canare Crimp Tool.
- Note2:
- For crimping instructions, please refer to this page or the instruction manual.
- Note3:
- Suitable Die Set for BCP-A5F is TCD-35CA; do not use TCD-5CF/TCD-55FA for BCP-A5F.
- (*1):
- Excluding BCP-A25, BCP-A25F and BCP-A4
BCP-C SeriesCrimp Type
| Model | Suitable Cable | Center Pin | Sleeve | Boot | Die Set | Standard package | |
|---|---|---|---|---|---|---|---|
| Canare | Others | ||||||
| BCP-C1 | L-1.5C2VS, V*-1.5C | 83264, 83267 | Solder | BN7022 | CB01 | TCD-1DB | 20pcs / 100pcs |
| BCP-C5HD | L-5CHD | - | BN1139 | B75004A | CB05A | TCD-5HD | 20pcs / 100pcs |
| BCP-C6HD | L-6CHD | - | BN1083A | BN7074A | - | TCD-67HD | 20pcs / 100pcs |
| BCP-C71A | - | 7731A, 9064, 9292, 1617A, 9011 | BN1043A | BN7021A | - | TCD-7CA | 20pcs / 100pcs |
| BCP-C7FA | L-7CFB | - | BN1012B | BN7021A | - | TCD-7CA | 20pcs / 100pcs |
| BCP-C7HD | L-7CHD | - | BN1082A | BN7021A | - | TCD-67HD | 20pcs / 100pcs |
Key Features and Benefits
- Return Loss:@26.4dB@2GHz (*2)
- Note1:
- Be sure to use Canare Crimp Tool.
- Note2:
- For crimping instructions, please refer to this page or the instruction manual.
- (*2):
- Excluding BCP-C1
BCP-LC Series (Right Angle)Crimp Type
| Model | Suitable Cable | Center Pin | Sleeve | Boot | Die Set | Standard package | |
|---|---|---|---|---|---|---|---|
| Canare | Others | ||||||
| BCP-LC3 | L-3C2VS, L-3C2V,V*-3C | 1855A, 8218, 1417B, 1418B | B11014E | BN7003A | - | TCD-35CA | 20pcs / 100pcs |
| BCP-LC3F | L-3CFB, V*-3CFB | - | B11015E | BN7003A | - | TCD-35CA | 20pcs / 100pcs |
| BCP-LC5 | L-5C2VS, L-5C2V, V*-5C | - | B11016E | BN7016 | - | TCD-35CA | 20pcs / 100pcs |
| BCP-LC5F | L-5CFB, V*-5CFB | - | B11020D | B75004A | - | TCD-5CF, TCD-55FA | 20pcs / 100pcs |
Key Features and Benefits
- Return Loss:@26.4dB@2GHz
- Canare crimp design ensures quick and reliable
- Gold plated “snap locks” center pin and beryllium copper outer contact.
- Note1:
- Be sure to use Canare Crimp Tool.
- Note2:
- For crimping instructions, please refer to this page or the instruction manual.
Technical Note
Voltage Standing - wave Ratio (VSWR) and Return Loss
Terminating the receiving end of a limited length coaxial cable using a resistance value not equal to its characteristic impedance creates a reflected wave that returns back down the cable to the sending end. The result is interference developing between the travelling wave and the return wave which results in a standing wave that causes voltage levels to fluctuate. The degree to which terminating resistance matches the characteristic impedance is indicated using the VSWR or voltage standing-wave ratio standard shown in Fig. 1. Going hand in hand with the VSWR ratio is the return loss factor which measures the size of the reflected wave current in relation to the travelling wave current. (See Fig. 2)
Fig. 1 Voltage Distribution Over Coaxial Cable
| VSWR | Return Loss (dB) |
|---|---|
| 2 | 9.54 |
| 1.5 | 13.98 |
| 1.2 | 20.83 |
| 1.1 | 26.44 |
| 1.05 | 32.26 |
| 1.02 | 40.09 |
| 1.01 | 46.06 |
Fig. 2 VSWR to Return Loss Conversion Table
