-
CCF5-JFC, CCM5-PFC
75 ohm Triaxial Connectors
Canare CC series cover global triaxial interconnection. CC-F series are ideal for interconnecting European triax system and CC-K series for American triax system.
Key Features and Benefits
- True 75 ohm, DC 1.5 GHz; ≥20 dB return loss (≤1.2 VSWR)
- Push-lock mechanism
- Reliable crimp system
- Rugged and durable construction
- Tech Data
- Tech Note
- Downloads
CC-F Series: European preferred type
| Model | Description | Suitable Cable | Boot/Cap | Center contact |
Sleeve A | Sleeve B | Crimp Tool | Standard package | |
|---|---|---|---|---|---|---|---|---|---|
| Canare | Others | ||||||||
| CCF5-JFC | Crimp type, Female cable mount |
L-5CFTX | Belden: 7783A Klotz: TRIAX8 Fujikura: 4.8/1.0 EFTXF |
CB31 | BN9194 | BN7120 | BN7121 | TC-1 + TCD-65C |
1 |
| CCM5-PFC | Crimp type, Male cable mount |
L-5CFTX | Belden: 7783A Klotz: TRIAX8 Fujikura: 4.8/1.0 EFTXF |
CB32 | BN1135 | BN7120 | BN7121 | TC-1 + TCD-65C |
1 |
| CCF5-JFRC | Crimp type, Female panel mount |
L-5CFTX | Belden: 7783A Klotz: TRIAX8 Fujikura: 4.8/1.0 EFTXF |
DCF02 | BN9194 | BN7120 | BN7121 | TC-1 + TCD-65C |
1 |
| CCM5-PFRC | Crimp type, Male panel mount |
L-5CFTX | Belden: 7783A Klotz: TRIAX8 Fujikura: 4.8/1.0 EFTXF |
DCM02 | BN1135 | BN7120 | BN7121 | TC-1 + TCD-65C |
1 |
| CCF7-JFC | Crimp type, Female cable mount |
L-7CFTX | Belden: 7784AS Klotz: TRIAX11 Fujikura: SUPERFLEX11 |
CB31 | BN9182A | BN7113 | BN7114 | TC-2 + TCD-96C |
1 |
| CCM7-PFC | Crimp type, Male cable mount |
L-7CFTX | Belden: 7784AS Klotz: TRIAX11 Fujikura: SUPERFLEX11 |
CB32 | BN1131 | BN7113 | BN7114 | TC-2 + TCD-96C |
1 |
| CCF7-JFRC | Crimp type, Female panel mount |
L-7CFTX | Belden: 7784AS Klotz: TRIAX11 Fujikura: SUPERFLEX11 |
DCF02 | BN9182A | BN7113 | BN7114 | TC-2 + TCD-96C |
1 |
| CCM7-PFRC | Crimp type, Male panel mount |
L-7CFTX | Belden: 7784AS Klotz: TRIAX11 Fujikura: SUPERFLEX11 |
DCM02 | BN1131 | BN7113 | BN7114 | TC-2 + TCD-96C |
1 |
-
VSWR for CCx7-F
CC-K Series: U.S. preferred type
| Model | Description | Suitable Cable | Retrofi t Kit | Boot/Cap | Crimp Tool | Standard package |
|
|---|---|---|---|---|---|---|---|
| Canare | Others | ||||||
| CCF4-JK | Crimp type, Female cable mount | L-4CFTX | Belden: 1856A, 1857A, 9267 Gepco: LVT61859, VT61859 |
BN9127B | CB23 | TC-1 + TCD-316C |
1 |
| CCM4-PK | Crimp type, Male cable mount | L-4CFTX | Belden: 1856A, 1857A, 9267 Gepco: LVT61859, VT61859 |
BN9128C | CB22 | TC-1 + TCD-316C |
1 |
| CCF4-JKR | Crimp type, Female panel mount | L-4CFTX | Belden: 1856A, 1857A, 9267 Gepco: LVT61859, VT61859 |
BN9127B | DCM02 | TC-1 + TCD-316C |
1 |
| CCM4-PKR | Crimp type, Male panel mount | L-4CFTX | Belden: 1856A, 1857A, 9267 Gepco: LVT61859, VT61859 |
BN9128C | DCM03 | TC-1 + TCD-316C |
1 |
-
VSWR for CCx4-F
Technical Note
Voltage Standing - wave Ratio (VSWR) and Return Loss
Terminating the receiving end of a limited length coaxial cable using a resistance value not equal to its characteristic impedance creates a reflected wave that returns back down the cable to the sending end. The result is interference developing between the travelling wave and the return wave which results in a standing wave that causes voltage levels to fluctuate. The degree to which terminating resistance matches the characteristic impedance is indicated using the VSWR or voltage standing-wave ratio standard shown in Fig. 1. Going hand in hand with the VSWR ratio is the return loss factor which measures the size of the reflected wave current in relation to the travelling wave current. (See Fig. 2)
Fig. 1 Voltage Distribution Over Coaxial Cable
| VSWR | Return Loss (dB) |
|---|---|
| 2 | 9.54 |
| 1.5 | 13.98 |
| 1.2 | 20.83 |
| 1.1 | 26.44 |
| 1.05 | 32.26 |
| 1.02 | 40.09 |
| 1.01 | 46.06 |
Fig. 2 VSWR to Return Loss Conversion Table